IRD5100 IP Capable DVB-S/S2 Integrated Receiver and Decoder  The IRD5100 is a High and Standard Definition MPEG2 Integrated Receiver and Decoder which can be supplied in several input formats including:
- Single L Band with loop-through
- Dual L Band
- Single L Band and single 70MHz
- ASI input only
All IRD5100 units also have an external ASI input. The IRD5100 has factory configurable options of two LNB inputs or one input plus an L-band monitor output. Independent 13V/18V control of each input can be used with dual band LNB's.
In addition the DVE5100 can encapsulate up to two independent ASI streams(which can be the internally demodulated ASI, an external ASI decapsulated from an incoming IP stream and/or the external ASI input) into IP output stream. This enables route diversity for the ASI signal via internet of over RF. The IRD5100 is fully software upgradeable for a variety of options and is half of the size and a fraction of the weight of similar products. Thanks to its ½ rack width unit size, two units can be accommodated in a single 19" x 1 RU rackspace. Key Features- SD and HD auto detection and switching
- L-band, Dual L-band, L-band and 70MHz or ASI inputs
- DVBS QPSK as standard
- Software licence upgradeable to DVBS-2 QPSK and 8PSK
- MPEG2 SD 4:2:0 and 4:2:2 decoding included in base unit
- Software licence upgradeable for MPEG2 HD 4:2:0 and 4:2:2
- Traffic IP RJ45 connector for direct network connection
- Able to decapsulate one of four ASI streams pre-encapsulated elsewhere into IP and routed to the IRD5100
- Integral ASI routing under web browser control enables decapsulated ASI, an external ASI or the demodulated ASI to be routed to the decoder and/or two of the ASI signals to be routed to the encapsulator for output onto a IP stream
- Down-converted HD output for use with SD monitoring equipment
- Remote control via web browser / SNMP
- Field upgrade by USB memory stick
- BISS 1 and E Decryption
- Satellite ID display
Related Products |
Data Sheets
|
|